What’s in the Package
The driveway alert alarm kit comes with:
1 x Receiver
2 x Transmitters
4 x Wall Plugs
4 x Screws
1 x Instruction Manual
Power Requirements 3xAAA 1.5V battery(not included)
PIR Sensor Viewing Area Approx.100 Degrees Horizontal
PIR Sensor Range 24ft/8m approx.(varies by local conditions)
Transmission Range 328ft/100m approx.(in the open air)
Power Requirements 3xC 1.5V battery(not included)
Chime Volume Approx.90dB
Don’t mix battery types.
For the best ongoing performance, we recommend using only fresh, high-quality, alkaline batteries.
1. First, install batteries into the two transmitters. Face the transmitters to a different direction that has no any noticeably hot object moving at sufficient speed.
2. Install batteries or connect a power adapter to turn on the receiver, the LED indicators of the receiver will flash for 30 seconds, which means it’s under a code pairing status.
3. While the LED still flashing from the receiver, move your hand around the two transmitters’ PIR area one by one until the LED indicator is on and the receiver will beeps six times, indicating the two transmitters has successfully paired the code with the receiver.
Note: The receiver is only under a code pairing status for the first 30 seconds with LED indicator flashing after installed batteries. It’s very important that user has to finish the code pairing within the 30 seconds for receiver and the two transmitters. If failed, remove the batteries and try again.
Two sensors work with one receiver. Perfect if you have two places need to be monitered.
No matter which sensor is triggered, the receiver will get a alert signal and alarm.
Protect Home Garden Garage Shed Business Warehouse Aircraft Hangar Secret Place Space And Anywhere That You Need, Protect Your Privacy
Portable receiver has three settings: high or low chimes and off
The transmitter requires 3xAAA 1.5V batteries and receiver requires 3xC 1.5V batteries